Festool's MFK trimmer is one of the most cost-effective tools money can buy. It's modular design means only the router table needs to be replaced, not the entire router and it is best equipped for all application involving the routing of corners and edges. In just few steps, install the required router table and then you are ready to router edge veneer or grooves, round off corners, makes profiles and much more. With the parallel side fence it is easy to create perfect rebates and corners. The dust extraction system is positioned directly on the base to remove chips and dust without getting in your way. The trimmer is covered by Festool's comprehensive 3-year warranty.
There is an amazing collection of videos from both old and new Festool users. Watch what they have to say on YouTube.
Product and Guide Videos
Want to see product in action? Interested in seeing the quality results possible? Watch the product and guide videos on our YouTube page now.
Ergonomic and robust
due to large cast aluminium base with dual clamping mechanism and fine adjustment feature accurate to 0.1 mm. The 720W vertical motor ensures outstanding results, even with thicker edge veneer.
Edge veneer overhang
Flush trimming edge veneer is easy thanks to the recess in the base also possible on glued edges at 45°.
Work cleanly without leaving marks
The newly developed ball bearing guide brake with integral chip deflector. The ball bearing guide brake can be moved to the correct position within just few seconds without using tools and prevents the ball bearing guide from leaving marks on the edge band.
Rapid tool changing
Detachable base and spindle stop in the machine guarantee rapid tool changes.
Dust extraction point above the base
All the chips and dust generated by the MFK 700 are diverted into the chip deflector and through the cast base into the suction hose above the machine base, which allows you to guide the machine more easily.
Large contact and sliding surface
No tipping during operation and special slideway lining for clean, precision working results.
- Specially designed for trimming protruding edges
- Good view of the workpiece with extraction directly from the table
- Perfect working results with precision fine adjustment
- Large support base ensures safe guidance
- Specially designed for flush trimming and rounding protruding edges
- Unique ball bearing guide brake ensures perfect, streak-free working results
- Possible to flush trim 0-45° inclined edges (depending on cutter)
|Product Set Name||tool-in-systainer|
|Power consumption||720 W|
|No-load speed||10,000-26,000 min|
|Collet diameter||6-8 mm|
|Fine height adjustment range||14 mm|
|Connection diameter||27 mm|
|Max. cutter diameter||32 mm|
- Ball bearing guide brake
- SYS T-LOC Systainer
- Operating tool