Festool's VS 600 jointing system allows you to easily create perfect dovetail joints. Dovetailing is one of the oldest wood joining techniques and has always been regarded as sign of craftsmanship. With range of templates to choose from, half-blind and open dovetail joints, box joints and dowel joints can be produced to maximum working width of 650mm. The templates are easily changeable without the use of tools, and the basic unit has solid aluminium design with steel contact bar for long service life. The swivelling segment on the unit enables routing of base and side panels on one setting, while the simple clamping system enables accurate, repetitive positioning of work pieces.The machine is covered by Festool's comprehensive 3-year warranty.
There is an amazing collection of videos from both old and new Festool users. Watch what they have to say on YouTube.
Product and Guide Videos
Want to see product in action? Interested in seeing the quality results possible? Watch the product and guide videos on our YouTube page now.
Accurate, precise, beautiful
The VS600 achieves accurate results because the router, template, copying ring and cutter are fully compatible with one another. Beautiful joints are guaranteed with every job!
Whether small or large dovetail joints, box joints or dowel joints, the VS 600 has templates available to tackle them all.
In order to rout several pieces one after the other, the template simply folds upwards. The memory eccentric disk and simple clamping system enables accurate, repeat positioning of work pieces and templates.
Template and Cutter Selection Chart
|Joint Type||Work Piece|
|Template||VS Copying Ring Ø (mm)||VS Copying Ring Part No.||Cutter Part No.|
|OF 1010 (included)||OF 1400(not included)||Soft material||Hard material|
|Half-blind Dovetail||14 20||488877||17.0||490770||492181||490991||490992|
- copy rings and cutters are required for each cutter set
|10 14||491152 (Set)||8.5 (Z)|
|490772 (Z) 490770 (S)||492179 (Z)|
|14 25||491153 (Set)||13.8 (Z)|
|484176 (Z) 490771 (S)||492180 (Z)|
|Dowel 5 mm||< 12||488881||13.8||484176||492180||491066|
|Dowel 6 mm||12 14||491067|
|Dowel 8 mm||15 22||491068|
|Dowel 10 mm||23 -28||491069|
- Perfecting tradition
- Accurate results with fully compatible routers and accessories
- Solid aluminium design with steel contact bar ensures long service life
- Templates are easy to change
- Create half-blind dovetail joints
- Create open dovetail joints
- Create box joints
- Rout dowel holes for round dowel joints
|Product Set Name||vs-600|
|Work piece thickness||6 30 mm|
|Max. work piece length||650 mm|
Note: Templates are not included
You may be interested in this
All Festool products that can be registered for the extended warranty are clearly marked with the Festool SERVICE logo on the tool packaging, the carton has an identification sticker denoting machine type and serial number.
All you need to do is to complete the online warranty registration form. Upon completion of the online registration you will receive your Warranty confirmation by e-mail and your registration is done. The confirmation can be shown to your Festool Service Agent in case of repair.
All our customers receive our tools with a normal 12 month manufacturer warranty which is independent from any other agreements. This 1-year warranty can be extended by additional 2 years(*) to a total warranty period of 3 years if you return the correctly completed warranty registration form to If Tooltechinc Systems (AUST) Pty Ltd within 30 days after the date of purchase. The warranty registration must be completed with the customer’s details including the email address. The dealer must not use their email address for the registration. If the customer is not able to provide a valid email address, the tool cannot be registered for an extended warranty.
* The additional 2 year warranty does not apply to H Class Dust Extractors.
The warranty includes
- Note: Except where specifically stated, the following information applies equally to the one-year warranty and to the extended 1+2 warranty.
- Tooltechnic Systems (Aust) Pty Ltd guarantees that all machines purchased in Australia directly from us or directly from our authorised Australian dealers are free of material and manufacturing faults.
- We will (as appropriate) repair or freely replace faulty parts (including battery packs) caused by material or manufacturing faults.
- The periods within which a material or manufacturing fault defect must appear in order for you to be entitled to claim the warranty are one year from the date of purchase in the case of the one-year warranty, and three years from the date of purchase in the case of the 1+2 warranty. You must also make a claim, and the claim must be received by us, within those same periods in order to have your claim accepted.
- Warranty Claim
In order to claim the warranty you must write to us advising us of the nature of the fault and providing your name and street address.
You may write to us either by mail to 21 - 27 Evolution Drive Dandenong South VIC 3175 or by email to firstname.lastname@example.org.
We will then advise you by return of the address we nominate to which you must deliver or send the machine (or battery pack, if applicable) intact and in original condition together with proof of purchase or warranty confirmation documents (where you are claiming under the extended 1+2 warranty after the expiration of one year from the date of purchase, you must provide your 1+2 warranty confirmation document – proof of purchase alone will not be sufficient). The address we nominate may be that of one of our authorised dealers or it may be our address in Dandenong South, Victoria. You bear the expenses you incur in making the claim (e.g. the cost of having the machine delivered to us or our authorised dealer).
- The provision of warranty services neither extends the warranty period nor renews the warranty period
The warranty does not cover
Normal wear and tear to wear parts (e.g. carbon brushes, sanding pads, abrasive sheets, saw blades, router bits, rubber sleeves, stirring rods, cutting blades, cutting accessories, drill bits, etc.).
Faults or defects caused by
- Incorrect use and handling of the machine (i.e. use and handling not in accordance with the Festool operating manual).
- Continuous industrial use.
- Impacts, falls or climatic influences.
- Overloading or damage that occurs as a result of incorrect or careless handling or unsuitable operating materials.
- Improper modifications or repairs performed by customers or third parties.
- The use of non-original parts, accessories or consumable materials and the resulting consequences.
In the case of battery packs, faults or defects appearing after 700 charging cycles (even if the fault or defect appears at a time which is otherwise inside the warranty period).
The benefits to you given by our warranty are in addition to other rights and remedies you have under a law in relation to the goods to which our warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Warranty on Product Purchased Outside of Australia
Warranty only applies to Product purchased by you inside Australia from authorised Australian FESTOOL dealers.
10-Year Spare Parts Availability
We guarantee that spare parts will be available for a minimum of 10 years after a product is discontinued. If Tooltechinc Systems (AUST) Pty Ltd is unable to keep its promise, you will receive a comparable new product from the current product range free of charge as a replacement in exchange for your original product.
Any tool parts replaced under a warranty claim are guaranteed for 6 months from the date of the warranty repair.
30 Day Money Back Guarantee
We are so confident that you will thoroughly enjoy our tools, that we offer a 30 day, no hassle money back guarantee. You can test all Festool tools within 30 days of purchase.
Change in Services
Tooltechnic Systems (AUST) Pty Ltd reserves the right to cancel, supplement or change the warranty and services or these terms of warranty and service entirely or in part, giving reasonable notice, or without such notice if good cause is shown, while taking reasonable consideration of your interests.
The law of Australia applies.
Sole place of jurisdiction for all disagreements relating to the warranty is the headquarters of the Tooltechnic Systems (AUST) Pty Ltd.
If a clause in these terms of warranty and service is or becomes ineffective or invalid in part or in full or a regulatory gap is found in the warranty, the effectiveness of the other terms remains unaffected. Instead of the ineffective or invalid clause, the relevant effective or valid clause that comes as close as possible to the sense and purpose of the invalid clause shall be considered agreed. In the event of a regulatory gap, the clause that corresponds to what would have been agreed shall be considered agreed.
This warranty is given by Tooltechnic Systems (Aust) Pty Ltd whose details are:
Business address: 21 - 27 Evolution Drive, Dandenong South VIC 3175
Telephone number: 1300 063 900
Fax number: 03 8845 7079
Email address: email@example.com