The Festool vacuum clamping system makes the seemingly impossible become possible clamping without limits. The high-quality plastic pads ensure no marks are left behind, even on highly polished surfaces. The lightweight and compact unit is easily transported in systainer, and clamps securely to work pieces up to 30kg and 1m. The system can be easily expanded with second clamp for larger work pieces, and can rotate 360°, and pivot 90°. There are four different pads available to allow clamping of curved or rounded work pieces, and pads can be changed easily and without tools thanks to the FastFix system. The vacuum clamping system is covered by Festool's comprehensive 3-year warranty.
There is an amazing collection of videos from both old and new Festool users. Watch what they have to say on YouTube.
Product and Guide Videos
Want to see product in action? Interested in seeing the quality results possible? Watch the product and guide videos on our YouTube page now.
Clamping without trace
The high-quality plastic used in the vacuum pad is so soft and flexible that the material surface is thoroughly protected. Even highly polished surfaces stay free of scratches and damage.
A strong hold
The clamping unit supports work pieces up to 30kg and 1m². For large work pieces, simply expand the system with second clamping unit. foot release valve allows you to release the suction while holding the work piece with two hands.
Versatile and flexible
You can securely clamp curved or rounded work pieces, thanks to the four different vacuum pads available. The FastFix system allows pads to be changed over quickly and tool-free.
Clamping without limits
The vacuum clamping system allows you to process work pieces from all sides without re-clamping, because the vacuum pad can be rotated through 360° and pivoted up to 90°.
Combine with the MFT system
The VAC SYS can be connected to the MFT multifunction table using an adapter plate. When you have finished clamping, simply fold the VAC SYS down and out of the way.
The pump is compact and lightweight for easy transport in Systainer, as are the clamping units. Suitable for use in the workshop or on-site.
- Gripping in every way
- Does not damage or mark surfaces
- Base can be attached easily using clamps or screws
- 360° rotation and 90° tilt for full manoeuvrability
- Compact and light for easy transport
- FastFix system allows fast tool-free pad changes
- Clamping of non-porous workpieces up to 30kg
- Use with the MFT multifunction table
|Product Set Name||vac-sys-foot-release|
|Power consumption at 50 Hz||160 200 W|
|Power consumption at 60 Hz||200 230 W|
|Pump capacity at 50 Hz||2.7 m/h|
|Pump capacity at 60 Hz||3.5 m/h|
|Minimum vacuum||81% 810 mbar|
- Foot release valve
- SYS Systainer
- Vacuum clamping unit VAC SYS SE 1