Fees, terms, conditions & minimum finance amount $1999 apply, for further information please visit https://www.husqvarna.com/au/services-solutions/finance-solutions/
- Husqvarna 555FX is a very powerful clearing saw developed for full time spacing tasks in tough conditions. The X-Torq engine provides raw power, rapid acceleration and excellent fuel economy. Short tube and bevel gear angled 24 degrees simplifies directional felling in dense forests. Very low vibrations thanks to LowVib. Delivered with Balance XT harness.
- The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
- Thumb-operated throttle for efficiency and precision control. Relieves pressure on the hand muscles.
|Weight (excl. cutting equipment)||8.9 kg|
|Lubricant type (bevel gear)||Biodegradable grease|
|Drive gear angle||24 °|
|Sound power level, guaranteed (LWA)||117 dB(A)|
|Sound pressure level at operators ear||103 dB(A)|
|Equivalent vibration level (ahv, eq) left handle||2.1 m/s²|
|Equivalent vibration level (ahv, eq) right handle||2.3 m/s²|
|Cylinder displacement||53.3 cm³|
|Power output||2.8 kW|
|Fuel tank volume||1.1 l|
|Fuel consumption||1.34 kg/h|
|Fuel consumption||480 g/kWh|
|Idling speed||2800 rpm|
|Ignition module air gap||0.3 mm|
|Electrode gap||0.5 mm|
|Torque, max.||3.5 Nm|
|Torque, max. at rpm||6900 rpm|
|Clutch engagement speed (±120)||4100 rpm|
|Maximum rpm output shaft||10500 rpm|