Makita 18V 2 Piece Brushless Combo DLX2176G
Add Extras










Makita 18V 2 Piece Brushless Combo DLX2176G
Bonus Via Redemption until 31 March 2021 - Makita 18V Blower - Short Nozzle DUB185Z
For redemption go to https://www.makita.com.au/promotions
DHP481Z - 18V Mobile Brushless Hammer Driver Drill
Features:
- Max. lock torque 125Nm
- New Brushless DC motor (BLDC)
- Mechanical 2 speed gearing
- Variable speed control by dial
- Battery fuel gauge: the power remaining in a battery can be indicated in 3 stages simply by pushing a button
- Twin LED job light with afterglow function
- XPT (eXtreme Protection Technology) for enhanced protection against dust an dripping water
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Specifications: | |
---|---|
Impacts Per Minute | Hi: 0-31,500ipm Lo: 0-8,250ipm |
Max Fastening Torque | Hard: 115Nm Soft: 60Nm |
Net Weight | 2.7kg |
No Load Speed | Hi: 0-2,100rpm Lo: 0-550rpm |
Overall Length | 205mm |
Capacity | Masonry: 16 mm Steel: 13mm Wood: 76mm |
Voltage | 18V |
DTD154Z - 18V Mobile Brushless Impact Driver
Features:
- Brushless motor for more power and longer runtimes
- Aluminium hammer case
- One touch bit installation
- Electronic 3 stage impact selection
- T:mode for self drilling screws
- Variable speed control by trigger
- Ergonomically designed handle
Specifications: | |
---|---|
Impact Rate - 1st | 1st: 0-3,800ipm 2nd: 0-2,600ipm 3rd: 0-1,100ipm |
Max Fastening Torque | 175N.m |
Net Weight | 1.5kg w/BL1860B |
No Load Speed - 1st | 1st: 0-3,600rpm 2nd: 0-2,100rpm 3rd: 0-1,100rpm |
Overall Length | 117mm |
Capacity | Coarse Thread: 22-125 mm High Tensile Bolt: M5-M14 Machine Screws: M4-M8 Standard Bolt: M5-M16 |
Submit Review
You may be interested in this
Warranty Terms for Makita
MAKITA POWER TOOLS & ACCESSORIES:
Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):
Category | Warranty (Effective 1st July 2020) |
---|---|
ALL CORDLESS SKINS LI-ION | 5YR (Registered within 30 days)* or 3YR (Registered post 30 days or Non-registered)** |
240V – PNEUMATIC – GAS – LASER | 2YR |
PETROL POWERED PRODUCTS | 2YR |
ADAPTORS – BATTERIES – CHARGERS | 2YR |
CLOTHING – ACCESSORY CONSUMABLES – SPARE PARTS*** | 1YR |
*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.
**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.
***The spare parts must also have been fitted by an Authorised Service Agent.
Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:
- The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;
- The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and
- The repairs are not required as a result of normal wear and tear.
Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia "Makita" means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.
IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Makita (Australia) Pty Ltd ACN 001 117 335