Makita's Auto-start Wireless System (AWS) has modernised on-demand dust extraction to meet the needs of cordless power tool users. AWS allows you to work with maximum efficiency, without the hazard of dust & leads. Featuring our legendary cordless technology, the AWS range has the power, speed & runtime to keep you ahead of the game.
Attach your DVC864 Dust extraction vacuum to your AWS tool and activate your dust extraction vacuum with your tool's power button.
Makita 18V AWS 225mm Drywall Sander DSL800ZU
- Variable speed control - rotating speed can be changed by turning the speed adjustment dial from 1 to 5, allowing the user to select the ideal speed to suit the material and the compound
- Telescopic pipe shaft - adjustable from 1,100 mm in length to 1,520 mm in length quickly adjusting pole length to suit the application
- Soft start - suppresses start up reaction for smooth start ups
- Removable pad guard - the top of guard can be removed creating a straight edge for sanding close to corners of walls and ceilings
- Compatible with extension handle - optional extension handle is available extending the overall length to 2,100 mm optimum for sanding high walls and ceilings
- eXtreme Protection Technology (XPT) - suppresses start up reaction for smooth start ups
- Auto-start Wireless System (AWS) - allows the tool and compatible vacuum to run automatically while the switch trigger of the sander is engaged and stop once the trigger is released
- Constant Speed Control - rotating speed is kept constant regardless of the amount of load allowing for a fine and even finish
|Pad diameter||210 mm|
|Abrasive paper diameter||225 mm|
|No load speed||1,000 - 1,800 rpm|
|Sound pressure level||75 dB(A)|
|Overall length||1,100 - 1,520 mm|
Makita 42L Wet/Dry Dust Extraction Vacuum VC4210MX2
The Makita VC4210M is an ergonomically designed Wet/Dry dust extractor featuring automatic filter cleaning and a flow rate sensor to meet Dust Class M regulations.
- Approved for dust class M of EC regulation
- Easily converts from industrial wet/dry vac to dust extraction
- 1,200W motor with 25kPa max sealed suction performance
- Automatic filter cleaning system
- Power tool activation for vacuum on and off
|Max sealed suction||25.0 kPa|
|Max. air volume||4.5 m³/min|
|Tank capacity||42 L|
|Powertool input||1,100 W|
|Total Connected Load||2,300 W|
|Overall length||605 mm|
|Net weight||16 kg|
|Power supply cord||7.5 m|
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
- Star Protection
- Battery Fuel Gauge
- Multi-contact slide type terminal
- Protective gel coating
- Active 3 Controls current, voltage and thermal temperature
- Shock absorbing construction
- The fastest charge times in the industry
- Intelligent battery & charger communication system
- Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
- Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
- Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
- Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
- Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
- Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
- Up 66% more run time than BL1830*
- 4-Stage battery fuel indicator
- 45 minute charge time
|Dimensions LxWxH||11 x 8 x 6.5 cm|
Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2
- Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
|Cell Capacity||1.5-5.0 Ah|
|Charge Time||15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)|
|Net Weight||820 g|
|Overall Length||185 mm|
You may be interested in this
MAKITA POWER TOOLS & ACCESSORIES:
Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):
|Category||Warranty (Effective 1st July 2020)|
|ALL CORDLESS SKINS LI-ION||5YR (Registered within 30 days)* or
3YR (Registered post 30 days or Non-registered)**
|240V – PNEUMATIC – GAS – LASER||2YR|
|PETROL POWERED PRODUCTS||2YR|
|ADAPTORS – BATTERIES – CHARGERS||2YR|
|CLOTHING – ACCESSORY CONSUMABLES – SPARE PARTS***||1YR|
*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.
**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.
***The spare parts must also have been fitted by an Authorised Service Agent.
Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:
- The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;
- The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and
- The repairs are not required as a result of normal wear and tear.
Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia "Makita" means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.
IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Makita (Australia) Pty Ltd ACN 001 117 335