Makita 18V Brushless Hammer Drill 5.0Ah Set DHP481RTE
Makita 18V Brushless Hammer Drill 5.0Ah Set DHP481RTE
Features:
- Single sleeve keyless chuck
- Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications
- Mode ring selection
- Mechanical 2 speed gearing
- Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
- All metal gear construction
- Twin LED job light with after-glow function
- Battery fuel gauge shows power remaining in battery
- Single sleeve keyless chuck allows for easy bit installation. Removal by one hand
- High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
- Extreme Protection Technology with enhanced dust and drip resistant performance
Specifications: | |
|---|---|
| Voltage | 18V |
| Impacts Per Minute | Hi: 0 - 31,000ipm Lo: 0 - 8,250ipm |
| Max Fastening Torque | Hard: 125Nm Soft: 60Nm |
| No Load Speed | Hi: 0 - 2,100rpm Lo: 0 - 550rpm |
| Capacity | Masonry - 16 mm Steel - 13mm Wood - 76mm |
| Dimensions (L x W x H) | 205mm x 79mm x 249mm |
| Weight | 2kg |
Submit Review
You may be interested in this
Warranty Terms for Makita
MAKITA POWER TOOLS & ACCESSORIES:
Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):
| Category | Warranty (Effective 1st July 2020) |
|---|---|
| ALL CORDLESS SKINS LI-ION | 5YR (Registered within 30 days)* or 3YR (Registered post 30 days or Non-registered)** |
| 240V – PNEUMATIC – GAS – LASER | 2YR |
| PETROL POWERED PRODUCTS | 2YR |
| ADAPTORS – BATTERIES – CHARGERS | 2YR |
| CLOTHING – ACCESSORY CONSUMABLES – SPARE PARTS*** | 1YR |
*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.
**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.
***The spare parts must also have been fitted by an Authorised Service Agent.
Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:
- The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;
- The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and
- The repairs are not required as a result of normal wear and tear.
Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia "Makita" means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.
IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Makita (Australia) Pty Ltd ACN 001 117 335
