Spend above $699 on Metabo Cordless Products to redeem.Find out more
*Terms & conditions apply.Valid until 31/01/2022
Spend above $699 on Metabo Cordless Products to redeem.
This offer is only valid for spending above $699 on purchase of Metabo Cordless Products during the promotional period.
- Spend between $699 - $998 on Any Metabo 18 V Cordless Products and Redeem 1X CC 18 LTX BL (600349850) Cordless Angle Grinders.
- Spend Between $999 - $1298 on Any Metabo 18 V Cordless Products and Redeem 1x SSE 18 LTX BL Compact (602366850) Cordless Sabre Saw
- Spend Over $1298 on Any Metabo 18 V Cordless Products and Redeem 1 x SXA 18 LTX 125 BL (600146850) Cordless Random Orbital Sanders
Products must be purchased in the promotional period 01/11/2021 to 31/1/2022 from an approved Metabo Australia dealer. All redemption offers must be received by close of business 28/2/2022. Only one redemption per transaction. Cannot be used in conjunction with any other offer.
Metabo 18V Hammer Drill 120Nm SB 18 LTX BL I
- Brushless hammer drill with maximum power for demanding applications
- Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
- Unique Metabo brushless motor for quick work progress and highest efficiency when drilling and screwdriving
- Precision Stop: electronic torque control with increased precision for precise, delicate working
- High-performance impact mechanism for optimum drilling performance
- Spindle with hexagonal recess for screwdriver bits for working without chuck
- Collar (Ø 43 mm) for versatile use
- Integrated working light to illuminate the contact area
- Robust die cast aluminium gear housing for optimum heat dissipation and long service life
- With handy belt hook and bit case which can be fixed either on the right or left side
- Battery packs with capacity display for checking the charge status
- Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
|Maximum torque - soft||60 Nm|
|Pulse torque||65 Nm|
|Maximum torque, hard||120 Nm|
|Adjustable torque||1 - 20 Nm|
|Drill-Ø masonry||16 mm|
|Drill-Ø steel||13 mm|
|Drill-Ø soft wood||65 mm|
|No-load speed||0 - 500 / 0 - 1850 rpm|
|Maximum impact rate||32300 bpm|
|Chuck capacity||1.5 - 13 mm|
|Weight (including battery pack)||2.2 kg|
Metabo 18V Brushless Impact Wrench SSW 18 LTX 300 BL
- Compact cordless impact driver with 1/2" male square and 300 Nm
- Unique Metabo brushless motor for quick work progress and highest efficiency for any application
- Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent over tightening
- High torque machine with low kick-back torque
- Twelve speed/torque levels for a wide range of applications
- Integrated work light for illumination of the work area
- Robust die cast aluminium gear housing for optimum heat dissipation and durability
- Handy belt hook, can be fixed either on the right or left side
- Battery packs with capacity display for checking the charge status
- Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack
|Max. no-load speed||0 - 2650 rpm|
|Maximum impact rate||3750 bpm|
|Maximum torque||300 Nm|
|Bit retainer||Male square 1/2" (12.70 mm)|
|Vibration - Impact screwdriving||7 m/s²|
|Vibration - Uncertainty of measurement K||1.5 m/s²|
|Noise emission - Sound pressure level||95 dB(A)|
|Noise emission - Sound power level (LwA)||106 dB(A)|
|Noise emission - Uncertainty of measurement K||3 dB(A)|
Metabo 18V LiHD Battery Pack 8.0Ah 625369000
- LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
- Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
- Patented "AIR COOLED" charging technology
- Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
- Processor-controlled charge and discharge management
- Capacity display with almost no self-discharge
- One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners
Metabo 12-36V Air Cooled Charger ASC 55 627047000
- Monitored charging with microcontroller
- Battery diagnosis
- Charge time approximately 30 minutes at 1.5 Ah
- "AIR COOLED" function
- For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
- Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
- Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
- "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
You may be interested in this
XXL WARRANTY (THE METABO 3 YEAR WARRANTY)
If a machine purchased after January 2004 is registered within 4 weeks, Metabo grants an extended warranty of 3 years, also starting with the date of purchase of the machine to the end user/customer.
Registration can be effected exclusively online at www.metabo-service.com and can be done by the customer themsleves. The customer will receive the XXL warranty confirmation by email or can print it immediately. This confirmation is always relates specifically to one machine.
When tendering a warranty claim, the XXL warranty confirmation or the registration printout has to accompany the sales receipt illustrating the date of sale.
MANUFACTURER'S DECLARATION OF WARRANTY
Notwithstanding statutory requirements, Metabo provides warranty in accordance with the legislation of the customer's own country of residence, but in all cases for a minimum of 1 year, commencing from the date on which the tool/machine is sold to the end user.
The warranty covers defects in material and/or workmanship only.
When making a claim under the warranty, the original proof of purchase bearing the date of purchase must be submitted. The repairs under warranty may only be carried out by Metabo's own service stations, or authorised Metabo warranty service agents.
Excluded from the warranty are:
- incorrect use, overloading of the machine (example: use of jigsaw in pallet construction), or fitting non-approved accessories
- use of force, damage caused by external influences or foreign bodies such as sand or stones
- damage caused by non-observance of the instructions for use such as connection to an unsuitable mains supply or voltage or non-compliance with the installation instructions
- normal wear
The warranty also does not cover tools/machines, which have been partially or completely dismantled.