- Monitored charging with microcontroller
- Battery diagnosis
- Charge time approximately 30 minutes at 1.4 Ah
- Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
- Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
- For charging all old and new Metabo NiCd and NiMH battery packs of 4.8 V -18 V, as well as the new Li-Ion battery packs of 12 V-18 V
- and quot;AIR COOLED and quot; function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.