Tilt Jib (Short) Type STJS5
The type STJS5 Tilt Jib (Short) is designed with a tilt facility allowing extra height to compensate for the hook and sling length lost when lifting with a Jib attachment. A maximum height of 1.36 metres can be gained while the Jib can be fully xtended to 2.09 metres. This Jib has been designed with wide pockets suitable for Forklifts with special hydraulic Tine Positioners. This slip-on attachment is held to the Forklift by a safety chain. The Jibs overall length when closed is 1.42 metres.
Supplied with safety swivel Hook and Shackle.
The standard finish on the type STJS5 Tilt Jib (Short) is Zinc Plated.Specifications:
- Safe Working Load (SWL): 4750kg Max.
- Unit Weight: 210kg
- Load Centre: 980mm
- Pocket Size: 185 x 75
- Pocket Centres: 875mm
- Horizontal C of G: 650mm
- Vertical C of G: 300mm
**NOTE - When selecting a jib attachment check the pocket centres of the jib you wish to order. Those noted with the prefix SF, ST and SJW are fitted with wide pockets, and generally suit forklifts fitted with special hydraulic tine positioners.
The lift capacities stated are a structural rating for the jib only, and make no claim as to the suitability of the forklift. Actual forklift capacity may be less than the structural capacity of the jib. Check with the forklift supplier for actual working capacities.
In accordance with AS2359.1, when lifting with a jib attachment, the net lifting capacity should be 0.8 times the rating of the forklift, to allow for a swinging load.